NSA1000P Series Spectrum Analyzer
+ -163 dBm Displayed Average Noise Level (DANL)
+ Phase noise -106 dBc/Hz @1GHz and offset at 10 kHz
+ Total amplitude accuracy <0.7 dB
+ 1 Hz minimum resolution bandwidth (RBW)
+ Optional EMI Pre-Test function, optional EMC test software
+ Waterfall plot graphic, modulation signal quality analysis, audio demodulation, ect. multiple general and extended test functions.
+ tandard Pass/Fail on-site test and alert function
+ Adopt all-digital intermediate frequency technology
+ Multiple interfaces: USB Host, USB Device, LAN, earphone interface, HDMI
+ 10.4-inch multi-touch screen
NSA1000P Series Spectrum Analyzer
+ Frequency range 10Hz - 7.5GHz
+ -163 dBm Displayed Average Noise Level (DANL)
+ Phase noise -106 dBc/Hz @1GHz and offset at 10 kHz
+ Total amplitude accuracy <0.7 dB
+ 1 Hz minimum resolution bandwidth (RBW)
+ EMI pre-compliance test kit, optional EMC test software
+ Waterfall plot graphic, modulation signal quality analysis, audio demodulation, ect. multiple general and extended test functions.
+ Standard Pass/Fail on-site test and alert function
+ Adopt all-digital intermediate frequency technology
+ Multiple interfaces: USB Host, USB Device, LAN, earphone interface, HDMI
+ 10.4-inch multi-touch screen
Frequency range
DANL
Minimum Resolution Bandwidth
multi-touch screen
Excellent performance
1Hz minimum resolution bandwidth (RBW), effectively distinguishingthe nearby signals
Quick capture function
Car remote keys, TPMS tire pressure modules and smal wireless modules usually use ASK/FSK modulation.XSA800 can complete the capture of ASK/FSK signals, and directly obtain its center frequency, powerand offset parameters.
Excellent small signal measurement capability
-163 dBm DANL(Displayed Average Noise Level),can observe weaker small signals
More accurate low-noise measurements
Phase Noise <- 106 dBc/Hz @1GHz at 10 kHz offset
Pass/Fail function
Quickly determine if the test results pass
Waterfall plot graphic
View the behavior of varying signal parameters over time. track the frequency and power behaviorover the time, particularly intermittent signals.The user can use waterfall plot graphic to analyzethe stability of a signal over the time, or to identify intermittent interference signals in communications systems.
Provides EMl pre-compliance test function
Equipped with EMl filter (6dB) and quasi-peak detector as standard,it is more accurate for EMl pre-test and diagnosis, and complete testing and production report can be completed by using supporting software.
Provide multiple extended function modes
Standard modulation signal quality analysis, audio demodulation, field strength measurement, channel measurementand frequency counter, ect. multiple general and extended test functions.
Provide EMC test function (optional)
Support local device standalone mode and PC upper computer mode; Built-in limit lines for national standard, European standard, household
appliances, automotive and other industry regulations; Realize radiation source location by data comparison and analysis.
Product Specifications
About Owon
Specifications
|
Frequency |
|||||||
|
Frequency Range |
XSA1015P(-LF) |
9kHz to 1.5GHz (Standard Model); 10Hz to 1.5GHz(-LF Model) |
|||||
|
XSA1032P |
9kHz to 3.2GHz |
||||||
|
XSA1036P(-LF) |
9kHz to 3.6GHz (Standard Model); 10Hz to 3.6GHz(-LF Model) |
||||||
|
XSA1075P(-LF) |
9kHz to 7.5GHz (Standard Model); 10Hz to 7.5GHz(-LF Model) |
||||||
|
Frequency Resolution |
1 Hz |
||||||
|
Frequency Span |
|||||||
|
Span Range |
0 Hz, 100 Hz to max frequency of instrument |
||||||
|
Span Uncertainty |
± span / (sweep points-1) |
||||||
|
SSB Phase Noise(20℃ to 30℃,fc=1 GHz) |
|||||||
|
Carrier Offset |
10 kHz |
< -106 dBc/Hz |
|||||
|
100 kHz |
< -104 dBc/Hz |
||||||
|
1 MHz |
< -115 dBc/Hz |
||||||
|
Bandwidth |
|||||||
|
Resolution Bandwidth(-3 dB) |
1 Hz to 1 MHz, in 1-3-5-10 sequence |
||||||
|
RBW Accuracy |
< 5% nominal |
||||||
|
Resolution Filter Shape Factor (60 dB : 3 dB) |
<5 nominal |
||||||
|
Video Bandwidth (-3 dB) |
10 Hz to 3 MHz, in 1-3-5-10 sequence |
||||||
|
Resolution Bandwidth(-6 dB)(EMI) |
200 Hz,9 kHz,120 kHz,1 MHz |
||||||
|
Amplitude |
|||||||
|
measurement range
|
XSA1015P |
DANL to +10 dBm,100 kHz to 10 MHz, Preamp Off DANL to +20 dBm,10 MHz to 1.5 GHz, Preamp Off |
|||||
|
XSA1032P |
DANL to +10 dBm,100 kHz to 10 MHz, Preamp Off DANL to +20 dBm,10 MHz to 3.2 GHz, Preamp Off |
||||||
|
XSA1036P |
DANL to +10 dBm,100 kHz to 10 MHz, Preamp Off DANL to +20 dBm,10 MHz to 3.6 GHz, Preamp Off |
||||||
|
XSA1075P |
DANL to +10 dBm,100 kHz to 10 MHz, Preamp Off DANL to +20 dBm,10 MHz to 7.5 GHz, Preamp Off |
||||||
|
Max Input Level |
|||||||
|
DC Voltage |
50 V |
||||||
|
Continuous RF power |
Attenuation = 40 dB, +20 dBm(100mV) |
||||||
|
Max. damage level |
+30 dBm(1 W) |
||||||
|
Display Average Noise Level (DANL) |
|||||||
|
Preamp Off |
9 kHz to 1 MHz |
-95 dBm (Typical), <-88 dBm |
|||||
|
1 MHz to 500 MHz |
-140 dBm (Typical), <-130dBm |
||||||
|
500 MHz to 3.6 GHz |
-138 dBm (Typical),<-128 dBm |
||||||
|
3.6 GHz to 6 GHz |
-134 dBm (Typical),<-124 dBm |
||||||
|
6 GHz to 7.5 GHz |
-129 dBm (Typical),<-119 dBm |
||||||
|
Preamp On |
100 kHz to 1 MHz |
-135 dBm (Typical), <-128 dBm |
|||||
|
1 MHz to 500 MHz |
-160 dBm (Typical),<-150 dBm
|
||||||
|
500 MHz to 3.6 GHz |
-158 dBm (Typical),<-148 dBm |
||||||
|
3.6 GHz to 6 GHz |
-154 dBm (Typical),<-144 dBm |
||||||
|
6 GHz to 7.5 GHz |
-149 dBm (Typical),<-139 dBm |
||||||
|
Frequency response(20℃ to 30℃,30% to 70% relative humidity, input attenuation=10 dB, reference frequency= 50 MHz) |
|||||||
|
Preamp Off |
＜0.7 dB |
||||||
|
Preamp On |
＜1.0 dB |
||||||
|
Difference and Accuracy |
|||||||
|
Uncertainty |
fc = 50 MHz, peak detector, preamplifier off, attenuation = 10 dB, input signal level = -10 dBm, 20℃ to 30℃ |
||||||
|
＜ 0.4 dB |
|||||||
|
Tracking Generator (optional) |
|||||||
|
Frequency Range |
XSA1015P |
100 kHz to 1.5 GHz |
|||||
|
XSA1032P |
100 kHz to 3.2 GHz |
||||||
|
XSA1036P |
100 kHz to 3.6 GHz |
||||||
|
XSA1075P |
100 kHz to 7.5 GHz |
||||||
|
Output power level range |
-40 dBm to 0 dBm |
||||||
|
Output level resolution |
1 dB |
||||||
|
Output flatness |
Relative to 50 MHz |
||||||
|
± 3 dB |
|||||||
|
Tracking generator spurious |
Harmonic spurious |
-20 dBc (Tracking generator output power -10 dBm) |
|||||
|
Non-harmonic spurious |
-20 dBc (Tracking generator output power -10 dBm) |
||||||
|
Tracking generator to input terminal isolation |
-60 dB (Tracking generator output power 0 dBm) |
||||||
|
Interface |
USB Host, USB Device,LAN,HDMI |
||||||
|
Display |
10.4 inches (1024*768) TFT LCD |
||||||
|
Appearance |
|||||||
|
Dimensions |
375 mm (W) × 185 mm (H) × 120 mm (D) |
||||||
|
Weight |
Approx. 5.0 kg (without package) |
||||||
Hot Tags: nsa1000p series spectrum analyzer, China, suppliers, manufacturers, best
You Might Also Like
Send Inquiry