VDS Series X-Y Mode PC Oscilloscope
- Up to 100MHz bandwidth, and max 1GS/s real-time sample rate - 10M record length - Friendly UI : FFT, or X-Y, and waveform 2 views displayed on the same screen - Multi-trigger option : edge, video, slope, pulse, and alternate - USB isolation - less signal inference, more PC protection - USB bus powering, and LAN remote control (optional) - Ultra-thin body design, easy portabilitySend InquiryChat Now
We are known as one of world's leading China manufacturers and suppliers. Welcome to buy the famous brands' OWON VDS series pc oscilloscope, computer oscilloscope, online oscilloscope, pc usb oscilloscope, computer based oscilloscope, best usb oscilloscope with cheap price from us. We have many products in stock at your choice. Consult the quotation with us now.
1. X-Y mode, FFT mode with waveform displayed on the same screen
What factors limit the power supply miniaturization?
With the development of power modules, engineers have focused on how to make modules smaller and lighter. In fact, we all understand that we can increase the power density of products by increasing the switching frequency. But why has the module's volume so far not changed so much? What restricts the increase of switching frequency?
With the application of switching power supply products under the market, increasingly smaller, lighter, high-efficiency, low-radiation, low-cost and other characteristics are required to satisfy various electronic terminal equipments. In order to meet the current portable electronic terminal equipment, the switching power supply must be made small in size. Due to its light weight, it has become a matter of increasing concern for designers to increase the operating frequency of switching power supplies. However, what are the factors limiting the frequency of switching power supplies? In fact, it mainly includes three aspects: switch tubes, transformers, and EMI and PCB design.
1, switch and switching frequency
Switching tube as the core device of the switching power supply module, its switching speed and switching loss directly affect the limit of the switching frequency, the following analysis for everyone about
a, switching speed
The loss of the MOS transistor consists of switching loss and drive loss. The turn-on delay time td(on), rise time tr, turn-off delay time td(off), and fall time tf.
For this MOSFET, its limit switching frequency is: fs=1/(td(on)+tr+td(off)+tf) Hz=1/(8ns+91ns+38ns+32ns)=5.9MHz, in practice In the design, since the duty cycle of the control switch achieves voltage regulation, the on and off of the switch tube cannot be instantaneously completed. That is, the actual limit switching frequency of the switch is much less than 5.9 MHz, so the switching speed of the switch tube itself limits the increase of the switching frequency. .
2. About Owon