VDS Series Multiple Triggers PC Oscilloscope

VDS Series Multiple Triggers PC Oscilloscope

- Up to 100MHz bandwidth, and max 1GS/s real-time sample rate - 10M record length - Friendly UI : FFT, or X-Y, and waveform 2 views displayed on the same screen - Multi-trigger option : edge, video, slope, pulse, and alternate - USB isolation - less signal inference, more PC protection - USB bus powering, and LAN remote control (optional) - Ultra-thin body design, easy portability

Send InquiryChat Now

Product Details

We are known as one of world's leading China manufacturers and suppliers. Welcome to buy the famous brands' OWON VDS series pc oscilloscope, computer oscilloscope, online oscilloscope, pc usb oscilloscope, computer based oscilloscope, best usb oscilloscope with cheap price from us. We have many products in stock at your choice. Consult the quotation with us now.


1. Multi-trigger option

Edge, Video, Slope, Pulse, and Alternate

 


 



FAQ


What is the difference between spectrum analyzer and oscilloscope?


Could not tell the difference between oscilloscope and spectrum analyzer often making joke, in order to avoid flaws, this article briefly summarizes the following four points - with real-time bandwidth, dynamic range, sensitivity, power measurement accuracy, compare the oscilloscope and spectrum analyzer analysis performance indicators To distinguish between the two.

1 Real-time bandwidth

For oscilloscopes, the bandwidth is usually its measurement frequency range. The spectrum analyzer has bandwidth definitions such as IF bandwidth and resolution bandwidth. Here, we discuss the real-time bandwidth that can analyze the signal in real time.

For spectrum analyzers, the bandwidth of the final analog IF can usually be used as the real-time bandwidth of its signal analysis. The real-time bandwidth of most spectrum analysis is only a few megahertz, and the wide real-time bandwidth is usually tens of megahertz. The widest bandwidth FSW can reach 500 MHz. The oscilloscope's real-time bandwidth is its effective analog bandwidth for real-time sampling, typically hundreds of megahertz, and up to several gigahertz.

What needs to be pointed out here is that most real-time oscilloscopes may not have the same real-time bandwidth when the vertical scale setting is different. When the vertical scale is set to the most sensitive, the real-time bandwidth usually decreases.

In terms of real-time bandwidth, the oscilloscope is generally better than the spectrum analyzer, which is particularly beneficial for some ultra-wideband signal analysis, especially in the modulation analysis has unparalleled advantages.

2 dynamic range

The dynamic range indicator varies according to its definition. In many cases, the dynamic range is described as the level difference between the maximum and minimum signal measured by the instrument. When changing the measurement settings, the instrument's ability to measure large and small signals is different. For example, if the spectrum analyzer is not the same in attenuation settings, the distortion caused by measuring large signals is not the same. Here, we discuss the ability of the instrument to measure large and small signals at the same time, ie, the optimal dynamic range of the oscilloscope and the spectrum analyzer under appropriate settings without changing any measurement settings.

For spectrum analyzers, the average noise level, second-order distortion, and third-order distortion are the most important factors that limit the dynamic range without considering the near-end noise and spurious conditions such as phase noise. The calculation is based on the specifications of the mainstream spectrum analyzers. Its ideal dynamic range is about 90dB (limited by second-order distortion).

Most oscilloscopes are limited by the number of AD sampling bits and the noise floor. The ideal dynamic range of traditional oscilloscopes usually does not exceed 50dB. (For R&S RTO oscilloscopes, the dynamic range can be as high as 86dB at 100KHz RBW)

In terms of dynamic range, spectrum analyzers are superior to oscilloscopes. However, it should be pointed out here that this is true for the spectrum analysis of the signal. However, the frequency spectrum of the oscilloscope is the same frame data. The spectrum of the spectrum analyzer is not the same frame data in most cases, so for the transient signal, The spectrum analyzer may not be able to measure it. The probability that an oscilloscope finds transient signals (where the signal satisfies the dynamic range) is much greater.

3 Sensitivity

The sensitivity discussed here refers to the level of minimum signal that the oscilloscope and spectrum analyzer can test. This indicator is closely related to instrument settings.

For an oscilloscope, when the oscilloscope is set to the most sensitive position on the Y axis, usually the oscilloscope can measure the minimum signal at 1mV/div. Aside from port mismatch, the noise and trace generated by the oscilloscope's signal channel are not. The noise caused by stability is the most important factor that limits the sensitivity of the oscilloscope.

4 Power Measurement Accuracy

For frequency domain analysis, power measurement accuracy is a very important technical indicator. Whether it is an oscilloscope or a spectrum analyzer, the amount of influence on the power measurement accuracy is very large. The following are the main influences:

For oscilloscopes, the impact of power measurement accuracy is: port mismatch caused by reflection, vertical system error, frequency response, AD quantization error, calibration signal error.

For the spectrum analyzer, the impact of power measurement accuracy is: port mismatch caused by reflection, reference level error, attenuator error, bandwidth conversion error, frequency response, calibration signal error.

Here, we do not analyze and compare the influence quantities one by one. We compare the power measurement of the 1GHz frequency signal. Through measurement comparison between the RTO oscilloscope and the FSW spectrum analyzer, we can see that the power measurement values of the oscilloscope and the spectrum analyzer are at 1GHz. Only about 0.2dB difference, this is a very good measurement accuracy indicator. Because the spectrum analyzer's measurement accuracy at 1GHz is very good.

In addition, in the frequency range, the oscilloscope's frequency response is also very good, not exceeding 0.5dB in the 4GHz range. From this point of view, the oscilloscope is even better than the spectrum analyzer performance.

In general, oscilloscopes and spectrum analyzers have their own advantages in frequency domain analysis performance. Spectrum analyzers are superior in terms of sensitivity and other technical indicators. Oscilloscopes are superior to spectrum analyzers in real-time bandwidth. When measuring different types of signals, you can choose according to the test requirements and the different technical characteristics of the instrument.



3. About Owon

品牌介绍.jpg

荣誉证书.jpg

Inquiry