XDS Series Multimeter Digital Oscilloscope

XDS Series Multimeter Digital Oscilloscope

Super Performance + 8-bit, 12-bit or 14-bit high resolution ADC, restoring the waveform detail fully + 40M record length, and 75,000 wfms/s waveform refresh rate + low background noise, vertical sensitivity in 1 mV/div - 10 V/div + multi- trigger, and bus decoding function + SCPI, and LabVIEW supported Creative New Look + ultra-thin body-design, less space accommodation + multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and more + VGA port - better solution for video expansion, and teaching demonstration + 8 inch 800 x 600 high resolution LCD + optional multi-touch screen, more user-friendly operation experience n-in-1 functions as data logger, and multimeter with data logging function, and dual-channel 25MHz / 50MHz arbitrary waveform generator, furthermore, battery pack, and WiFi module supported

Send InquiryChat Now

Product Details


1. Multi-function mobile tester

Oscilloscope + signal generator + multimeter +data logger +frequency counter + decoder. Support Li-on battery to implement floating test.

1.png


FAQ


How to use clamp meter?

The clamp meter was originally used to measure AC current. Nowadays, the multimeter has all the functions it can use to measure AC and DC voltage, current, resistance, capacitance, temperature, frequency, diode, and continuity.

1, when the measured current is very small, its reading is not obvious, you can test the wire around a few turns, the number of turns to be the number of turns in the middle of the jaw, then the reading = measured value / number of turns.

 

2 During measurement, the conductor under test shall be placed in the center of the jaws and close the jaws to reduce errors.






Inquiry