OW Series Data Logger Digital Multimeter

OW Series Data Logger Digital Multimeter

+ 3 5/6 bit resolution + Data Logger + Multimeter + Thermometer + BLE 4.0 wireless transmission, more stable,less power consumption + Chart and Diagram mode helps to analyze the data tendency + Flashlight function lightens the darkness + Support NCV non-contact voltage sense + True RMS test supported + Widely supported on Android, iOS and Windows + Build-in offline record function supports non-stop up to 7 days non-stop recording.

Send InquiryChat Now

Product Details

OW Series Data Logger Digital Multimeter


OW series multimeter is the branch of OWON's handheld multimeter series. With smaller size and faster reponse rate. Support NCV, True RMS, bluetooth communication. Can be used as Data Logger, Multimeter and Thermometer. Contact us for more detail information!

Not only a multimeter, also a data logger and thermometer.Real time data are updated and recorded to end  user device, no need to be in field. User can define  the record time and sampling gap, data can be shown  as chart and diagram, multi-devices connection  supports data comparison.   User and test object are totally isolated,  which secure the life.


FAQ


How to use clamp meter?


A digital clamp meter is an electrical tester that combines a voltmeter and a clamp ammeter. Like the multimeter, the clamp meteralso undergoes a digital process from the past analog to today.

 

The clamp meter is mainly composed of an electromagnetic ammeter and a penetrating current transformer. It is a portable instrument that can directly measure the alternating current of the circuit without disconnecting the circuit. It is very easy to use in electrical maintenance and it is widely used.


The clamp meter was originally used to measure AC current. Nowadays, the multimeter has all the functions it can use to measure AC and DC voltage, current, resistance, capacitance, temperature, frequency, diode, and continuity.

1. According to need, choose A~(AC) or A—(DC) file.

 

2. Press the trigger to clamp the clamp meter head into the current wire to be tested and hold it in the middle of the clamp head.


3, when the measured current is very small, its reading is not obvious, you can test the wire around a few turns, the number of turns to be the number of turns in the middle of the jaw, then the reading = measured value / number of turns.

 

4. During measurement, the conductor under test shall be placed in the center of the jaws and close the jaws to reduce errors.






About Owon

品牌介绍.jpg

荣誉证书.jpg

Inquiry